Soft feel Quartkit contains:
1 Quart /0,97 Liter resin, 8 oz/ 236 ml Hardener and 8 oz /236 ml Thinner .
1.5 Gallon Kit contains 1 Gallon / 3,78 Liter, Hardener 1 Quart/ 0,97 L and 1 Quart / 0,97 L Thinner .
For larger Quantities please contact us info@xtremecolors.nl
Highlights
Ease of Application: Alsa Soft Feel Paint coating is simply sprayed on using traditional spray painting equipment.
Low Cost / High Margins: Alsa Soft Feel Paint coating adds a negligible amount to operating costs; yet products finished with this type of
soft coating can demand significant sales price increases over identical products with hard surfaces.
Design Options: Alsa Soft Feel Paint coating can be ordered clear or with a custom color. So you have the option of just changing the feel of a
product's surface or changing its appearance as well.
Applicable to Almost Any Substrate: Alsa Soft Feel Paint coating is a very adaptable coating that can adhere to almost any surface.
Durability: Alsa Soft Feel Paint coating not only creates products that are soft to touch, it also improves the durability of the product surface.
It is both scratch & mar resistant.
*** Of course, the best way to appreciate a product coating like this is to feel it!
Alsa's Soft Feel Coating is applied using conventional spray painting equipment.
Primer: A primer is not needed for most plastics however specific primers for metals and hard-to-coat plastics are available.
Alsa Soft Feel Coating: The topcoat is sprayed on then the product must be force dried.
Alsa Soft Feel Coating is made up of:
Resin - ST2010 Resin is the main component of Soft Feel coating.
Thinner - adding more or less of the ST2011 Thinner will produce different textile feels and looks (Rubber / Velvet / Leather).
Hardener - ST2012 Hardener is used with Alsa Soft Feel coating.
Alsa Soft Feel Resin |
| Description |
Alsa Soft Feel Paint clear coat ST2010 is a two-pack transparent or pigmented polyurethane topcoat characterized by a deep mattness and a pleasant tactile softness to the touch. |
| Product Data |
Pigment/Binder: |
Inorganic. Polyester based resin. |
| The following data is dependent upon color |
Solvents: |
Aromatic hydrocarbons, esters |
| Specific Gravity |
1.02 ± 0.02 g/cm3 |
| Viscosity, Brookfield sp.5, 50 rpm: |
30 ± 5 sec. Zahn #3 |
| Non-volatile Content (as packaged) |
|
| Solids content; by weight: |
47% |
| Solids content; by volume: |
39% |
| Fire Hazard: |
Flammable |
| Flash point: |
2° C or 35°F |
| Coverage: |
400 sq. Ft/ gallon @ 1 mil |
| Application |
Substrate: |
Plastic (ABS, Polycarbonate, Polystyrene) |
| Pre-treatment: |
ST2010 could be applied onto DJ331/332/334, TG701 or TG702 basecoats. Also to plain plastic. |
| Hardener: |
Alsa Soft Feeling Paint Hardener ST2012
|
| Thinner: |
ST2011 |
Mixing ratio by volume
ST2010 resin :
ST2012 hardener:
ST2011 thinner: |
100 grams
15 grams
30 grams |
| Application Method: |
Conventional spraying, 0.04 mil nozzle, 6 to 14.5 psi fluid pressure, 50-60 psi atomizing pressure. |
| Application Viscosity: |
23 - 28 sec. Zahn #2 |
| Pot Life |
4 Hours @ ambient conditions. |
| Recommended dry film thickness: |
1.5-2.0 mils |
| Drying |
Flash Off: |
5 minutes at ambient conditions. |
| Forced Drying: |
30-40 minutes at 150°F. |
| Physical Properties |
Color: |
Clear or Pigmented |
| Gloss: |
Range from 2 30 units @ 60° angle. |
| Outdoor durability: |
Good |
| Chemical Resistance: |
High |
| Temperature Resistance: |
Minimum 96 hours at 130°C |
| Storage |
Store at ambient conditions and away from open flame. |
| Safety Precautions |
Please refer to the Material Safety Data Sheet. | |
| —————————————————————————— |
Alsa Soft Feel Thinner |
| Description |
Alsa Solvent-Based Thinner ST2011 is a medium to fast evaporating thinner primarily intended for basecoats, but it can also be used for many other paint qualities. |
| Product Data |
Solvents: |
Aromatic Hydrocarbons, Esters |
| Specific Gravity |
0.87± 0.02 g/cm3 |
| Viscosity, Brookfield sp.5, 50 rpm: |
10 sec. Zahn #3
|
Non-volatile Content (as packaged)
Solids content; by weight:
Solids content; by volume: |
100%
100% |
| Fire Hazard: |
Flammable |
| Flash point: |
25°C or 77°F |
| Application |
Substrate:
Hardener For:
Thinner:
Application Method:
Pot Life |
Please refer to the specific coating system to be utilized for application parameters. |
| Drying |
Flash Off: |
See the technical data sheet of the particular coating being utilized. |
| Forced Drying: |
| Storage |
Store at ambient conditions and away from open flame. |
| Safety Precautions |
Please refer to the Material Safety Data Sheet. | |
| —————————————————————————— |
Alsa Soft Feel Paint Hardener |
| Description |
Alsa Soft Feel Paint Hardener ST2012 is recommended for ST2010 Soft Feel polyurethane topcoat |
| Product Data The following data is dependent upon color |
Binder: |
Aliphatic pre-polymerized isocyanate resin. |
| Solvents: |
Aromatic hydrocarbons, esters |
| Specific Gravity |
1.00 ± 0.02 g/cm3 |
| Viscosity, Brookfield sp.5, 50 rpm: |
~ 25 sec. Zahn #3 |
| Non-volatile Content (as packaged) |
|
| Solids content; by weight: |
53% |
| Solids content; by volume: |
45% |
| Fire Hazard: |
Flammable |
| Flash point: |
2°C or 35°F |
| Application |
Substrate: |
Plastic(ABS, Polycarbonate, Polystyrene)
|
| Hardener For: |
Alsa Soft Feeling Paint Topcoats |
| Thinner: |
ST2011 |
| Application Method: |
>Conventional spraying, 0.04 mil nozzle, 6 to 14.5 psi fluid pressure, 50-60 psi atomizing pressure. |
| Pot Life |
Dependent on Alsa Soft Feeling Paint system. |
| Drying |
Flash Off: |
Refer to the technical data sheet of the particular Alsa Soft Feeling Paint topcoat being utilized. |
| Forced Drying: |
| Physical Properties |
Color: |
Clear |
| Gloss: |
Range from 2 85 units @ 60° angle. |
| Outdoor durability: |
Good |
| Chemical Resistance: |
High |
| Storage |
Store at ambient conditions and away from open flame. |
| Safety Precautions |
Please refer to the Material Safety Data Sheet. | |
| —————————————————————————— |
|
| Technical Property |
Performance |
| Gloss @ 60º Angle |
0º to 30º |
| Impact Resistance |
Excellent |
| Adhesion |
Excellent |
| Humidity Resistance |
Excellent |
| Salt Spray Resistance |
Excellent |
| Chemical Resistance |
Very Good |
| Abrasion Resistance |
Excellent |
| Temperature and Humidity Cycling |
Pass |
| Mar Resistance |
Very Good |
| Temperature Resistance |
130º C for 96 Hours | |
| |
|
Layer |
Application |
Dry Film Thickness |
Flash Off |
Force Dry
(Plastics) |
Pot life |
|
Primer |
Standard Spray |
.8 to 1.0 mils |
See Product TDS |
See Product TDS |
N/A |
|
Soft Feeling Paint |
Standard Spray |
1.5 to 2.0 mils |
5 min. at ambient |
30-40 minutes at 150 °F (65°C)
|
4 hours | |
| |
| Click here to view the MSDS/TDS |
| |
| ** Warning: Soft Feel paint is highly flammable. Please take care in storing and applying it away from open flame or high heats. It is also poisonous if ingested, so please store it away from children. |
|
—————————————————————————— |
